GE GFD40 Owner's Manual page 28

STEP-BY-STEP INSTRUCTIONS (cont.)
Machine
screws
Hinge
Cover
28
Reinstall Hinge Assembly
7. Install the hinge assembly in the opposite side of the door as shown.
Machine
screws
8. Hold the hinge and door on their side with one hand and fasten the
Reinstall Hinge Cover
9. Insert the hinge cover. Align the hinge cover holes with the holes
10. Secure the hinge cover with 2 taping screws.
Tapping
Screws
Push the hinge assembly in place until the hinge holes align with
the door holes.
4 machine screws as shown.
in the door.
www.GEAppliances.ca