Time Settings; Multi-Area; Boundary Settings; Rain Sensor Setting - Yard force LUV1000Ri Manual

MOWAP

Time settings

Here you can set three different working times and select the day
when the mower should work. Also set Mower date and time

Boundary settings

- Trimming: edge cutting function on/ off
- Width: Set how far the mower is allowed to go beyond the
perimeter wire. (Function only for the Yardforce LUV and X
series)
- Signal: Change from S1 to S2
12
MOWAP

Multi-Area

Here you can define up to 4 different mowing areas.
(Function only for the Yardforce X80i, X100i, X150i, LUV1000Ri )

Rain sensor setting

Setting a delay when the mower should resume work after the rain
13
GB