D) Usb/Memory Card Operation - Renkforce RUSD-1803BT Operating Instructions Manual

d) USB/Memory Card Operation

The device is equipped with a USB interface and a SD memory card reader. MP3 files stored on these media can
be played.
Do not connect any MP3-player to the USB interface if it is battery-operated. The USB interface power
supply may load the inserted batteries and cause overheating or explosion of a battery.
USB media up to 32 GB and a power intake of up to max. 1 A can be connected to the USB interface.
Only USB storage media can be operated at the USB socket. MP3 players with a USB port usually switch
into PC mode when this port is connected. In this mode, music files cannot be played. However, you may
connect the audio output of your MP3 player to the AUX (9).
Supports SD cards up to 32 GB. All media must be formatted in FAT 32.
Due to the great variety of USB and SD storage media and their different functions, some of which are
very producer-specific, we cannot guarantee that all media will be recognized and that all the operational
functions are available on this device.
If the storage medium is not recognised, remove it and insert it again.
• Connect your USB storage medium with the USB port (8).
• If you use a SD memory card, insert it into the SD card reader (21).
• The player switches to the respective input automatically and starts playback.
• The last inserted medium is selected automatically each time.
Button 1/ (15)
• Push this button to interrupt the playback briefly.
• When you confirm the button again, playback will begin at the point where it was interrupted.
Buttons (1) and
With these buttons you can select individual tracks or search for a specific section within one track.
The arrows on the buttons indicate the search direction (forward or back).
• Only push the buttons briefly to jump to the next or previous track.
• Push the buttons longer to search a certain section within one track.
(19)
47