Setting The Signal Tone Volume; Automatic Clean Lock; Switching The Water Filter Counter On And Off; Switching On Or Switching Off Condensation Protection - Thermador T36IT903NP Use & Care Manual

Setting the signal tone volume

You can adjust the volume level of the signal tones
generated e.g. with alarms.
Press " button to open the Settings menu.
1.
Use ( button to move to the menu item Appliance
2.
settings.
Press 8 button to open the menu item.
3.
Use ) button to move to the menu item Signal
4.
tone volume.
Press : button to open the menu item.
5.
Use ( ) buttons to select the required setting.
6.
Press 8 button.
7.
The setting is saved.
Press ; button to exit the menu.
8.

Automatic clean lock

You can use this function to select whether the
automatic clean lock is switched on automatically
when the door is opened.
Press " button to open the Settings menu.
1.
Use ( button to move to the menu item Appliance
2.
settings.
Press 8 button.
3.
Press ) button to move to the menu
4.
item Automatic clean lock.
To change the setting, press : button.
5.
Switching the water filter counter on and
off
If you have replaced the water filter with a particle
filter, switch the water filter counter off. It is not
needed in this case as the particle filter does not
have to be replaced.
Press " button to open the Settings menu.
1.
Use ( button to move to the Appliance settings
2.
menu.
Press 8 button.
3.
Press ) button to move to the menu item Water
4.
filter counter.
To change the setting, press : button.
5.
Switching on or switching off
condensation protection
This function is only available with 3-door
appliances. 3-door appliances are equipped with a
door pillar featuring condensation protection.
You can open the left-hand door of the refrigerator
compartment without opening the right-hand door
beforehand.
9
CAUTION
Never unfold the door pillar when the door is
open!It can get jammed when closing the door
and become damaged, or itself damage the
front panel of the right-hand door.
Operating the appliance en-us
A heater is built into the door pillar to prevent
condensation. Switching condensation protection on
or off switches the heater on or off.
~ "Settings menu" on page 11
Press " button to open the Settings menu.
1.
Use ( button to move to the menu item Appliance
2.
settings.
Press 8 button.
3.
Press ) button to move to the menu item Prevent
4.
condensation.
To change the setting, press : button.
5.

Theater mode

If Theater mode is switched on, the light will slowly
become brighter when the appliance is opened, and
then slowly darker when it is closed.
Switching Theater mode on or off
Press " button to open the Settings menu.
1.
Use ( button to move to the menu item Appliance
2.
settings.
Press 8 button to open the menu item.
3.
Use ) button to move to the menu item Theater
4.
mode.
Press : button to open the menu item.
5.
Use ) button to move to the menu item On or Off.
6.
Press 8 button.
7.
The setting is saved.
Press ; button to exit the menu.
8.

Setting the temperature unit

You can choose between the unit °C and °F.
1 ° means 1 °F
1 °C means 1 °C
Press " button to open the Settings menu.
1.
Use ( button to move to the menu item Appliance
2.
settings.
Press 8 button.
3.
Use ( button to move to the menu
4.
item Temperature unit.
Press : button.
5.
Use ( ) buttons to move to the required unit.
6.
Press 8 button.
7.
The unit will be changed.
Press ; button to exit the menu.
8.

Setting the language

Press " button to open the Settings menu.
1.
Use ( button to move to the menu item Appliance
2.
settings.
Press 8 button.
3.
Press ( button to move to the menu item
4.
Language.
Press : button.
5.
Use ( ) buttons to move to the required language.
6.
Press 8 button.
7.
The display restarts, and the start screen is
displayed.
17