Bypass Tray - FujiFilm ApeosPro C810 Reference Manual

The bottom face of loaded paper is the surface printed on.
Loadable paper
Paper size
Paper weight (g/m
Maximum number of sheets
(sheets) (J paper)
1.
Pull out the Paper Tray until it stops.
2.
When paper is already loaded in the tray, take out the paper.
3.
Pinch the guide clip, and adjust to the correct paper size.
4.
Fan a stack of paper, face the print surface down, and then
load the paper with edges aligned according to the direction
of the arrow.
Important
Do not load paper above the maximum fill line. It may cause
paper jams or machine malfunction.
Note
Adjust the guide correctly to the paper size. If the guide is not adjusted correctly, the machine cannot feed
the paper properly, resulting in paper jams.
5.
Push in the Paper Tray.
Setting special paper and other media
Hole punched paper
Paper orientation: Load paper with holes facing the left side when viewed from the front of the
machine

Bypass Tray

The Paper Tray 5 (Bypass) allows you to use a variety of paper sizes and types that cannot be used in
Paper Trays 1 to 4.
The top face of loaded paper is the surface printed on.
2 Single side
)
printing
Tray 3
Tray 4
JIS B5, A4, Letter
52 to 300
890
1,280
3 Basic Operations of the Machine
15