Specifications - Denon DHT-FS5 Owner's Manual

ENGLISH
n Error Messages
Display Cause
A signal with a sampling frequency
of 96 kHz (not compatible) has
been input.
The set's internal circuitry is not
operating properly.
The temperature inside the set is
too high.
There is a problem with the
speaker connections.
The temperature inside the set is
too high.

Measures
Either switch to the input from a player with a sampling
frequency with which the set is compatible, namely
32, 44.1 or 48 kHz, or use analog connections.
Turn off the power, then turn it back on. If the same
error message is displayed again, contact your store of
purchase for repairs.
Turn off the power and wait for a while.
Turn off the power, then turn it back on. If
displayed again, contact your store of purchase for
repairs.
Turn off the power and wait for a while.

Specifications

n
Front Speaker Unit
Type: 1-way 6-speaker
Rated output: 25 W x 4 (6 Ω/ohms) + 50 W x 1 (3 Ω/ohms)
Input sensitivity: 500 mV / 22 kΩ/kohms / 250 mV / 22 kΩ/kohms (selectable)
Frequency response: 80 Hz ~ 20 kHz
S/N ratio: 100 dB
Output : 1 Vrms
Subwoofer preout:
Frequency : 12 ~ 150Hz
Power supply: U.S.A., Canada models : AC 120 V, 60 Hz
is
European models :
When power is on : 33 W
Power consumption:
In standby :
Speaker units: 8 cm (3-5/32") cone type x 6
Maximum external dimensions:
Without feet : 750 (W) x 118 (H) x 138 (D) mm
(29-17/32" x 4-41/64" x 5-7/16")
With feet : 750 (W) x 140 (H) x 138 (D) mm
(29-17/32" x 5-1/8" x 5-7/16")
Weight: 5.1 kg (11 lbs 4 oz)
n
Remote Control Unit (RC-1095)
Remote control method: Infrared pulse method
R03/AAA Type (two batteries)
Batteries:
Maximum external dimensions:
49 (W) x 220 (H) x 24 (D) mm (1-59/64" x 8-21/32" x 15/16")
Weight: 110 g (Approx. 4 oz) (including batteries)
* For purposes of improvement, specifications and design are subject to change without notice.
AC 230 V, 50 Hz
0.5 W