Table of Contents
Advertisement
MAINTENANCE
Your tool requires no additional lubrication or maintenance.
There are no user serviceable parts in your power tool. Never use water or chemical cleaners to clean your power tool.
Wipe clean with a dry cloth. Always store your power tool in a dry place. Keep the motor ventilation slots clean. Keep all
working controls free of dust. Occasionally you may see sparks through the ventilation slots. This is normal and will not
damage your power tool.
For Battery tools
The ambient temperature range for the use and storage of tool and battery is 0°C-45°C.
The recommended ambient temperature range for the charging system during charging is 0°C-40°C.
TROUBLESHOOTING
Although your new angle grinder is really very simple to operate, if you do experience problems, please check the
following:
1. If your grinder disc wobbles or vibrates, check that outer flange is tight; check that the disc is correctly located on the
flange plate.
2. If there is any evidence that the grinding disc is damaged, do not use as the damaged disc may disintegrate. Remove
it and replace with a new disc. Dispose of old discs responsibly.
3. If working on aluminum or a similar soft alloy, the disc will soon become clogged and will not grind effectively.
ENVIRONMENTAL PROTECTION
Waste electrical products must not be disposed of with household waste. Please recycle where facilities exist.
Check with your local authorities or retailer for recycling advice.
18
Advertisement
Table of Contents
