Table of Contents
Advertisement
D) HOW TO CHARGE YOUR BATTERY PACK (See Fig. A3)
CHARGING PROCEDURE
1) Plug the charger into an appropriate outlet. The light
will be green.
2) Slide the battery pack into the charger, the light will
turn to red to indicate the charging process has started.
3) When charging is completed, the light will turn to
green. The pack is now fully charged, unplug the charger
and remove the battery pack.
WARNING: If the battery pack is warm e.g. after
continuous use or after exposure to direct sunlight or
heat, allow time to cool down before re-charging to
achieve the full charge.
Light
Red on
Green on
OPERATION
1. INSTALLING AND ADJUSTING AUXILIARY HANDLE
(See Fig. B)
You have the option of two working positions to provide
the safest and most comfortable control of your angle
grinder. The handle is screwed clockwise into either hole
on the sides of the gear case.
NOTE: This handle (1) should be used at all times to
maintain complete control of the tool.
2. HAND GRIP AREAS
Always hold your angle grinder firmly with both hands when operating.
Fig. A3
Status
Charging
Fully Charged
Fig. B
14
Advertisement
Table of Contents
