Introduction; Precautions; Initial Inspection; Quickstart - Campbell 108 Product Manual

Temperature probe

Hide thumbs Also See for 108:

Table of Contents

1. Introduction

The 108 Temperature Probe uses a thermistor to measure temperature in air, soil, and water. It

easily interfaces with most Campbell Scientific data loggers and can be used in a variety of

applications.

For Edlog data logger support, check the availability of an older manual at

www.campbellsci.com/old-manuals

, or contact Campbell Scientific for assistance.

section at the front of this manual.

READ AND UNDERSTAND the

Safety

Santoprene® rubber, which composes the black outer jacket of the 108 cable, will support

combustion in air. It is used because of its resistance to temperature extremes, moisture, and UV

degradation. It is rated as slow burning when tested according to U.L. 94 H.B. and passes

FMVSS302. However, local fire codes may preclude its use inside buildings.

Check the packaging and contents of the shipment. If damage occurred during transport,

immediately file a claim with the carrier. Contact Campbell Scientific to facilitate repair or

replacement.

Check model information against the shipping documents to ensure the expected products and

the correct lengths of cable are received. Model numbers are found on each product. On cables

and cabled items, the model number is usually found at the connection end of the cable. Report

any shortages immediately to Campbell Scientific.

A video that describes data logger programming using Short Cut is available at:

www.campbellsci.eu/videos/cr1000x-data

logger-getting-started-program-part-3.

Short

108 Temperature Probe 1

Table of Contents