Synology Rs3621Xs+ At A Glance - Synology NAS RS3621xs+ Hardware Installation Manual

Synology RS3621xs+ at a Glance

1 2 3 4
7
8 9
No. Article Name
POWER Button and
1
Indicator
2 STATUS Indicator
3 ALERT Indicator
4 Beep Off Button
DRIVE Status
5
Indicator
6 Drive Tray
7 Rail Kit Release Tab
1 For more information about the rail kit installation, please refer to the Quick Installation Guide that comes with the rail kit.
4 Chapter 1: Before You Start
6
10 11
13
Location
1. Press to power on your Synology NAS.
2. To power off your Synology NAS, press and hold until you
hear a beep sound and the Power LED starts blinking.
Displays the status of the system. For more information, see
"System Modes and LED Indicators".
Displays warnings regarding fan or temperature. For more
information, see "Other LED Indicators".
Front
Press to deactivate the beep that sounds when a malfunction
occurs.
Displays the status of drive. For more information, see "Other
LED Indicators".
Install drives (hard disk drives or solid state drives) here.
Push in and hold to release your Synology NAS from the rail kit
1
lock .
5
14 15 16
Description
7
12
17