How To Attach/Release The Magnetic Position Sensor And The Magnetic Position Sensor Attachment - Hitachi C25P Instruction Manual

4-3. How to attach/release the magnetic position sensor and the magnetic position sensor attachment

This section provides the procedure to attach the magnetic position sensor and the magnetic position sensor attachment
to the probe. Note that a probe cover is mounted after attaching these devices to the probe.
After use, reverse the procedure to remove these devices from the probe.
(1) Place the magnetic position sensor into the magnetic position sensor attachment. The direction mark of the sensor
is upward as shown in Figure 16.
(2) Attach the magnetic position sensor attachment to the probe as shown in Figure 17.
Projected part
(inside the attachment)
Groove of the probe
Caution
Attach the magnetic position sensor to the magnetic position sensor attachment correctly.
A false diagnosis may be caused if the sensor is attached in the wrong direction.
Figure 16 How to attach Magnetic Position Sensor
Figure 17 How to attach Magnetic Position Sensor Attachment
Magnetic Position Sensor
Direction mark
(upward)
Magnetic Position
Sensor Attachment
Magnetic Position
Sensor Attachment
-15-
MN1-5821 Rev. 4