Your Rangehood
Specifications
Model
Product dimensions (W,D,H mm)
Model
Extraction
Rangehood components
Your Airvolution Canopy Rangehood is supplied with:
Box Canopy Rangehood is supplied with:
–
1 × Rangehood
–
1 × Expandable 150mm ducting adapter
Expandable 150mm pipe
–
1 × Packet of fasteners and wall plugs
–
2 × Stainless Steel flue pieces (upper and lower)
–
1 × Wall Bracket ("hook") for the rangehood
–
1 × Wall Bracket for the inside of the chimney pieces
–
1 × "Outside Chimney" bracket
YO U R R A N G E H O O D
Other features:
Typical installation tools required
You'll most likely require the following tools/equipment
(not supplied) for the installation of your rangehood.
–
Electrical drill
–
Tape Measure
–
Screw-driver
–
Spirit Level
If ducting your rangehood, you'll also most likely require:
–
Jig saw
–
Ladder
–
Duct-tape
–
Ducting
5
5