Your Inalto Rangehood - Inalto ARBC90TBS User Manual

Your InAlto Rangehood

Specifications
Model Product dimensions (W,D,H mm)
900mm × 500mm × 548-1028mm
ARBC90TBS
Model Extraction
ARBC90TBS 1000m3/hr extraction
Rangehood components
Your Airvolution Canopy Rangehood is supplied with:
Box Canopy Rangehood is supplied with:
– 1 × Rangehood
– 1 × Expandable 150mm ducting adapter
Expandable 150mm pipe
– 1 × Packet of fasteners and wall plugs
– 2 × Stainless Steel flue pieces (upper and lower)
– 1 × Wall Bracket ("hook") for the rangehood
– 1 × Wall Bracket for the inside of the chimney pieces
– 1 × "Outside Chimney" bracket
YO U R R A N G E H O O D S
Other features:
– 4 speed invisible touch contorl
4 speed touch controls
– 2 × 1.5 LED lights
– 3 × Baffle filters
Typical installation tools required
You'll most likely require the following tools/equipment
(not supplied) for the installation of your rangehood.
– Electrical drill
– Tape Measure
– Screw-driver
– Spirit Level
If ducting your rangehood, you'll also most likely require:
– Jig saw
– Ladder
– Duct-tape
– Ducting
7
5