Operating Your Rangehood - Inalto ARGC60BTS User Manual

Operating
O P E R AT I N G YO U R R A N G E H O O D
Your Rangehood
ols Controls Your Airvolution Canopy rangehood features touch controls with four speed
levels of extraction.
After plug in power, will into Stand By mode automatic.
Display explanation:
O P E R AT I N G YO U R R A N G E H O O D
Your Airvolution Canopy rangehood features
levels of extraction.
After plug in power, will into Stand By mode automatic.
Timer button Timer button
Time setting: Time setting:
Keep pressing it when the machine is in stand by mode, it would start the time Keep pressing it when the machine is in stand by mode, it would start the time
setting. After pressing, the hour display would be flashing, you could press" setting.
" to do the setting. Press" " to do the setting. Press"
"or" " to do the setting. "or"
The third time press" The third time press" " or wait 10s, the time setting would finish.
Timer setting： Timer setting
Short press during working mode, pre-set cycle : Short press during working mode, pre-set cycle :
off→15mins→30mins→45mins→60mins→off. off 15mins 30mins 45mins 60mins off.
" "or" " is used for adjusting timer time, except "off" timer setting. " "or"
Quick timer: Press Quick timer: Press &
and starting the 5 minutes counting down. After 5 minutes working, the motor & and starting the 5 minutes counting down. After 5 minutes working, the motor &
light will turn off automatically & Buzzer sound on. light will turn off automatically & Buzzer sound on.
Speed plus button Speed plus button
For increasing the speed of the motor. Totally 4 speeds. For increasing the speed of the motor. Totally 4 speeds.
When the "TURBO" speed symbol appear, the motor reach the highest speed. When the "TURBO" speed symbol appear, the motor reach the highest speed.
After 5 minutes working in Turbo mode, the motor would change to the third speed After 5 minutes working in Turbo mode, the motor would change to the third speed
automatically. automatically.
Speed decrease button Speed decrease button
For decreasing the speed of the motor. For decreasing the speed of the motor.
Light button Light button
Short press for lamp power control. Short press for lamp power control.
1.Motor symbol, will rotate when the motor is working;
2.Time display;
3. Timer symbol, will appear when timer is setting and counting;
4.Light symbol; 5.Motor speed;
6.Turbo speed symbol, will appear when the speed is highest setted;
7.Alarm symbol, will appear 5 seconds when the counting down of timer is over.
8. Cleanning symbol, appear when total working time up to 14 hours or at the
first time using after pluging.
6
" again, change to minute setting, press" " again, change to minute setting, press"
" to do the setting.
" or wait 10s, the time setting would finish.
" is used for adjusting timer time, except "off" timer setting.
hold for 1 second, the digital display will be flashing & hold for 1 second, the digital display will be flashing
7
6
controls with speed
"or"