Cleaning Instructions - Panasonic CS-WU12WKY Series Operating Instructions Manual

ACXF55-2705̲OL.ai 12 3/3/2020 9:56:31 AM ACXF55-2705̲OL.ai 12 3/3/2020 9:56:31 AM

Cleaning instructions

To ensure optimal performance of the unit,
cleaning has to be carried out at regular
intervals. A dirty unit may cause malfunction.
Please consult authorised dealer.
• Switch off the power supply and unplug before
cleaning.
• Do not touch the aluminium fin, sharp parts may
cause injury.
• Do not use benzine, thinner or scouring powder.
• Use only soap (
detergent.
• Do not use water hotter than 40 °C.
Indoor unit
Wipe the unit gently with a soft,
dry cloth.
C
Dust filters
M
Every 2 weeks
• Wash/rinse the dust filters gently
Y
with water to avoid damage to the
CM
filter surface.
• Dry the dust filters thoroughly under shade,
MY
away from fire or direct sunlight.
• Replace any damaged filters.
CY
Please remove the Ag Clean
the dust filter with water. Ag Clean
CMY
models only.
K
Remove air filter
12
pH 7) or neutral household
Filter / PM2.5 Filter before wash/rinse
+
+ filter applicable to specific
Attach air filter
Indoor unit
Front panel PM 2.5 filters
*Ag Clean
+
Aluminium fin
Filter
Dust filters
nanoe-G Generator
Every 2 weeks
• Turn off main power supply.
• Clean with dry cotton bud.
• Do not touch during operation.
Ag Clean + Filter & PM 2.5 filter
Ag Clean
• Clean the filter whenever necessary.
• Don't wash/rinse the filter with water.
• The surface of the filter shouldn't be rubbed
with any object.
• The filter shouldn't be pulled with strong force
as it may get damaged.
For seasonal inspection after extended
non-use
• Checking of remote control batteries.
• No obstruction at air inlet and air outlet vents.
• Use Auto OFF/ON button to select COOL
operation. After 15 minutes of operation, it
is normal to have the following temperature
difference between air inlet and air outlet
vents:
COOL: 8 °C
For extended non-use
• Activate nanoe-G operation for 2~3 hours as
an alternative to remove moisture left in the
internal parts thoroughly to prevent mould
growth.
• Turn off the power supply and unplug.
• Remove the remote control batteries.
nanoe-G
Generator
Filter / PM 2.5 filter.
+