Commissioning And Operation - Klarstein Heat'n Beat 10035262 Manual

EN
18

COMMISSIONING AND OPERATION

Once the appliance has been properly installed and connected to a grounded electrical
outlet, it is ready to operate.
Note: Ensure the circuit breakers for the power supply are turned on.
Control Panel
The heater controls are located right of the heater outlet.
Remote Control
Remote Control Battery Replacement
Replace with a CR2025 battery and follow the diagram
at the back of remote handset to install the new battery.
Note: Do not throw the old battery into the garbage
can. Please recycle batteries through designated
channels.