Operation (Basic Functions); Operation Via Remote Control - Klarstein Galeras 10038687 Manual

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 29
EN
48

OPERATION (BASIC FUNCTIONS)

Note: The appliance can be operated either by the switches located on the
upper right side of the appliance or by the remote control included in the
delivery.
The standby switch located on the centre right side of the unit must be
switched on first.
It takes some time for the receiver to answer the transmitter. Do not press the
buttons more than once within 2 seconds to ensure correct operation.
Press the ON/OFF button on the remote control once to switch on the
appliance and the flame effect.
Press the FLAME button to adjust the flame brightness. The appliance has
5 brightness levels that are cycled through in sequence and the off setting.
Each time you press the FLAME button, the flame intensity decreases.
Press the HEAT button once to set the low heat level (900 W). Press the HEAT
button twice to set the high heat level (1800 W). If you press the button again,
the heating function is switched off.
The appliance has 12 different temperature settings from 18-30 °C, which
you can set in the order 30 °C > ... > 18 °C. Press and hold the TEMPERATURE
button for 3 seconds to change from Celsius (°C) to Fahrenheit (°F) (setting
range: 64-88 °F).
Timer setting: Press the TIMER key several times to cycle through the different
timer settings in succession : 1 h > ... > 8 h > Off.

OPERATION VIA REMOTE CONTROL

Switching on the appliance
Press the ON/OFF button on the remote control once to switch on the
appliance and the flame effect.
After you have inserted the AAA battery into the remote control, "10:00" and
"MON" are displayed on the LED screen at the first start.
Press the ON/OFF button to switch on the appliance "H0" is displayed on the
LED screen.
Set heating level
Press the HEAT button to switch on the heating function. Pressing the button
once activates the low heating level (900 W). "H1" is displayed on the LED
screen. If you press the button twice, the high heating level (1800 W) is
activated. "H2" is displayed on the screen. If you press the button again, the
heating function is switched off.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Galeras 10038688Galeras 10038689Galeras 10038690

Table of Contents