Machine Description; General Machine Description - HTC 650 E Classic Manual

Machine description

3 Machine description
3.1

General machine description

HTC 650 E Classic is designed for grinding small to medium-sized spaces and has a
frequency converter, which means that the RPM and the grinding discs' direction of
rotation can be regulated using buttons on the control panel. It is used to grind, coarse
grind, prepare and polish concrete, natural stone and terrazzo floors or other materials
specified in this manual or material recommended by HTC. The machine is a perfect
choice for removing coverings and for grinding concrete floors according to the HTC
Superfloor method, which is an environmentally-friendly method for grinding and
polishing concrete floors.
The machine is constructed from a number of main components, see Figure 3-1, page
9 and Figure 3-2, page 10. It can be combined with weights for adjusting the
grinding pressure, which makes the machine perfect for those with high demands for
flexibility.
The handle can be set at several different angles, select a position that suits you best.
The grinding cover has a connection for an external suction hose used for dry grinding.
The machine can easily be equipped with a large number of tools, depending on the
material to be ground. For the different tools, see HTC's Product Catalogue under the
Grinding Guide tab.
8
HTC 650 E Classic
3.0