Scope of supply - basic device Connecting the measurement case Reading out recordings MRG 96RM-E Flex RCM views Measurement transformer settings Example connection - voltage measurement Example connection - current measurement Schematic diagram: MRG 96RM-E Flex RCM design Technical data - 2 -...
Safety information Please read the operating instructions enclosed Do not use the measurement case in diligently, as well as all other publications that wet or moist environments or in the must be drawn upon for working with this vicinity of explosive gases or vapours. measurement case and the accessories.
E, please contact the support department of • Keep this description and the operation manual Janitza electronics GmbH (Tel. no. +49 6441- throughout the complete service life of the 9642-22). product and have them readily available for reference.
If you wish to read out the measured data, connect the measurement case to a PC via the Ethernet connection . The read-out is implemented via the GridVis software. ® MRG 96RM-E Flex RCM views Voltage inputs Power Analyser UMG 96RM-E Measurement transducer UMG 96 RM...
Measurement transformer settings Set the following parameters at the integrated measurement transducer: • Compensate for the influence of the coil lengths through the potentiometer switching (1). To do so, set the parameters according to the table: Setting Rogowski coil 300 mm Flex-CT-1A-300 mm DIP switch •...
Example connection - voltage measurement Voltage pickoffs with fuse Locking sleeve with bayonet catch for accommodating a fuse Max. 20mm Example connection - current measurement Voltage measurement terms Rogowski coil RCM measurement cable connections Residual current transformer not included in the scope of deliverables - 7 -...
Settings, parametrisation and safety information apply in accordance with the installation and operating instructions enclosed. Up to 2 residual current DIFF measurements can be selected! 0-30 MRG 96RM-E Flex RCM Switch Strommessung 1-4 Spannungsmessung 1-4 Current Input 1-4 Voltage Input 1-4...
Technical data Power supply 230 V, 50 Hz, 50 VA Interface Ethernet Measurement inputs See UMG 96RM-E operating instructions Measurements See UMG 96RM-Eoperating instructions Dimensions (L x W x H) 350 mm x 295 mm x 150 mm Weight 3,2 kg - 9 -...