Table of Contents
Advertisement
Display
The main display can be displayed in two different modes: "Full" and "Basic". The initial setting is "Full". To switch to the "Basic"
mode, change the setting on the Main display setting. (Refer to operation manual included with remote controller.)
<Full mode>
All icons are displayed for explanation.
2 345 6 7
$
#
6
7
8
Room
9
0
Cool
Set temp.
1
1
Mode
!
1 Operation mode
2 Preset temperature
3 Clock
4 Fan speed
5 Button function guide
Functions of the corresponding buttons appear here.
6
Appears when the ON/OFF operation is centrally controlled.
7
Appears when the operation mode is centrally controlled.
8
Appears when the preset temperature is centrally controlled.
9
Appears when the filter reset function is centrally controlled.
0
Indicates when filter needs maintenance.
Room temperature
1
2
Appears when the buttons are locked.
3
Appears when the On/Off timer or Auto-off timer function is enabled.
appears when the timer is disabled by the centralized control system.
appears when the HOLD function is enable.
Most settings (except ON/OFF, mode, fan speed, temperature) can be made from the Main menu.
OCH754A
8
Fri
83
Auto
83
Temp.
Fan
2
5
<Basic mode>
$
3
#
9
@
Cool
)
1
4
Mode
4
Appears when the Weekly timer is enabled.
5
Appears while the units are operated in the energy saving
mode. (Will not appear on some models of indoor units)
6
Appears while the outdoor units are operated in the silent mode.
7
Appears when the built-in thermistor on the remote control-
ler is activated to monitor the room temperature (1).
appears when the thermistor on the indoor unit is acti-
vated to monitor the room temperature.
8
Indicates the vane setting.
9
Indicates the louver setting.
)
Indicates the ventilation setting.
!
Appears when the preset temperature range is restricted.
@
Appears when an energy saving operation is performed us-
ing a "3D i-See sensor" function.
Centrally controlled
#
Appears for a certain period of time when a centrally-con-
trolled item is operated.
Preliminary error display
$
An check code appears during the preliminary error.
101
2
Fri
Auto
Set temp.
83
Temp.
Fan
5
3
4
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
