Table of Contents
Advertisement
CUBE Corner desk
25504
Step 24 Final assembly
Parts, fittings and tools
H
O
Mark the drill hole positions.
Remove the unit and drill a hole for
wall plug in the marked positions.
Chose correct fixings for your type
of wall (see page 17).
With help, lift the unit up and
aligning the holes, fix to the wall
using the correct screws and tighten
fully.
The assembly is now complete.
Warning
Serious or fatal crushing
injuries can occur from
furniture tipping over. To
prevent this furniture
tipping over it must be
permanently fixed to
the wall.
16
O
H
Advertisement
Table of Contents
