Thank you for purchasing the Mantis Desk. Please read the instructions and warnings carefully before use, to ensure safe and satisfactory operation of this product. At John Lewis, we are committed to making great products possible. From our in-house Design Team, to our Buyers, we work together to bring great designs to life.
Page 4
Your desk Description Dimensions LHS leg 750x514x30mm RHS leg 750x514x30mm Desk box 1142x495x188mm Drawer 435x400x88mm Bottom rail 1142x50x20mm Drawer cover 458x384x5mm Glass top 1204x555x10mm...
Product assembly Mantis Desk 816 28704 816 28705 Step 1 Parts, fittings and tools Insert dowels C and cam studs A into the allocated holes as shown. Cam studs A are tightened clockwise until the thread is no longer visible. Do not overturn.
Page 7
Step 3 Parts, fittings and tools Fix bottom rail part 5 to the leg, and then insert cams B into the allocated holes in the rail and in the back of the desk box. Cams are locked clockwise – do not overturn. Step 4 Parts, fittings and tools Connect the LHS leg to the...
Page 8
Step 5 Fittings and tools To fix the LHS leg to the desk box, insert bolts E with washers D into the allocated holes and tighten clockwise using allen key F provided. Step 6 Parts Before sliding the drawer into place, ensure that the runners are extended as shown below..
Step 7 Parts and fittings Attach the four self-adhesive pads to the groves as shown and place the drawer cover on top. Step 8 – final assembly Parts Gently with two people lift the glass top into place.
Page 10
Handle with care! A damaged edge or scratched surface can in rare cases cause the glass to fail unexpectedly into many small pieces. Glass is most vulnerable when struck from the side. Retain these instructions for future reference. John Lewis Partnership 171 Victoria Street London SW1E 5NN...