Repairs must be performed based on the
recommendation from the manufacturing
company. Maintenance and repairs that
require the assistance of other qualified
personnel must be performed under the
supervision of an individual specified in
the use of flammable refrigerants.
SAFETY ADVICE AND
WARNINGS
This appliance may be used by children
aged 8 years and over and persons with
reduced physical, sensory or mental
capabilities or lack of experience and
knowledge, if they have been given
appropriate supervision or training in the
use of the appliance in a safe and
Understand the dangers involved.
This appliance is not a toy. Children
should be supervised to ensure that they
do not play with the appliance.
Do not allow children to perform cleaning
and maintenance without supervision.
Install the appliance in accordance with
national wiring regulations.
Leave a space of 30 cm between walls or
other obstacles and the appliance. Do not
cover or obstruct the sides of the
appliance, leaving at least 30 cm space
around the appliance.
The product requires adequate ventilation
in order to function properly.
The fuse used in the appliance is type: T,
electrical characteristics: 250VAC, 3,15A.
If the supply cord is damaged, it must be
replaced by the manufacturer, its service
agent or similar qualified person in order
to avoid a hazard.
This appliance is for household use only,
not professional, industrial use.
Ensure that the voltage indicated on the rating
label matches the mains voltage before
plugging in the appliance.
Connect the appliance to a socket that can
supply a minimum of 16 amperes.
The appliance plug must match the electrical
socket of the socket. Never modify the plug. Do
not use plug adapters.
Do not force the connecting cable. Never use
the power cord to lift, carry or unplug the
appliance.
Do not wrap the power cord around the
appliance.
Check that the power cord is not pinched or
bent.
Do not allow the connecting cord to hang or
touch the hot surfaces of the appliance.
Check the condition of the electrical connection
cable. Damaged or entangled cables increase
the risk of electric shock.
It is recommended as an additional protection
in the electrical installation that feeds the
device, the use of a differential current device
with a maximum sensitivity of 30 mA. Consult
with an installer.
Do not touch the plug with wet hands.
Do not use the appliance with the damaged
power cord or plug.
If any of the enclosures of the appliance
breaks, immediately switch off the appliance
To avoid the possibility of electric shock.
Do not use the appliance if it has fallen, if there
are visible signs of damage, or if there is a
leak.
Use the appliance in a well-ventilated area.
If the appliance is used in the same room with
other gas or fuel appliances, it must be well
ventilated.
Do not place the appliance in direct sunlight.
EN
Need help?
Do you have a question about the COLD DIGITAL and is the answer not in the manual?
Questions and answers