JB Systems SPACE-4 Mk2 LASER Operation Manual page 6

ENGLISH
DESCRIPTION:
1. HANGING BRACKET: with 2 knobs on both sides to fasten the unit and a mounting hole to fix a
mounting hook.
2. LASER OUTPUT: the laser beam exits the enclosure, make sure to NEVER look inside the unit through
this opening while the laser effect is switched on!
3. POWER LED: indicates that the unit is switched on.
4. MUSIC LED: flashes to the sound of the music detected by the internal microphone.
5. IR RECEIVER: used to control the unit by the wireless remote control.
6. DMX INPUT: 3pin male XLR-connector used to connect universal DMX-cables. This input receives
instructions from a DMX-controller or from the Master in a Master/slave setup.
7. DMX OUTPUT: 3pin female XLR-connector used to connect the LASER with the next unit in the DMX
chain.
8. SAFETY EYEBOLT: used to attach a safety cable when the unit is rigged (see paragraph "overhead
rigging"
9. MAINS INPUT: IEC socket with integrated fuse holder, connect the supplied mains cable here.
10. LOCK SWITCH: used to switch the unit on/off by means of the key. Use the key to make sure only a
skilled operator is able to switch the laser on.
11. INTERLOCK input: used to connect the optional emergency stop switch (see picture). When you push
this switch the laser beam will disappear immediately.
IMPORTANT! For your own safety we strongly recommend to connect this optional switch!
THERE WILL BE NO LASER OUTPUT WHEN THE INTERLOCK INPUT IS NOT USED!
Temporary solution: install the spare connector on the laser. (see picture)
12. FUSE HOLDER
13. DISPLAY: shows the selected DMX address when the unit is in DMX-mode. Apart
from DMX-mode you can also select 4 other working modes, see further to learn
more about these modes.
14. [FUNC-UP-DOWN-ENTER] BUTTONS: Used to select the different functions of
the laser, see further to learn how to operate the unit.
15. INTERNAL MICROPHONE: The built-in microphone is used to synchronize the
laser show to the beat of the music.
JB SYSTEMS® 4/11
USER MANUAL
SPACE-4 Mk2 LASER