Continuous Shooting (Burst Mode) - FujiFilm X-S10 Owner's Manual

Hide thumbs Also See for X-S10:
Table of Contents

Advertisement

Continuous Shooting (Burst Mode)

Capture motion in a series of pictures.
1
Press the I  (drive) button to dis-
play drive-mode menu and select CH
HIGH SPEED BURST or CL LOW SPEED
BURST.
2
Choose the frame advance rate and press the shutter button
to start shooting.
Shooting ends when the shutter button is released or the
memory card is full.
O
Frame advance rates of 10 fps or faster are available only when
s ELECTRONIC SHUTTER is selected for A SHOOTING SETTING >
SHUTTER TYPE.
If fi le numbering reaches 9999 before shooting is complete, the re-
maining pictures will be recorded to a new folder.
Shooting ends when the memory card is full; the camera will record
all photos shot to that point. Burst shooting may not begin if the
space available on the memory card is insuffi cient.
Frame rates may slow as more shots are taken.
Frame rate varies with the scene, shutter speed, sensitivity, and focus
mode.
Depending on shooting conditions, frame rates may slow or the fl ash
may not fi re.
Recording times may increase during burst shooting.
Exposure
To vary exposure with each shot, select OFF for D BUTTON/DIAL
SETTING > SHUTTER AE.
N
Depending on such factors as aperture, sensitivity, and exposure com-
pensation, exposure may not be adjusted automatically.
5
93

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ff200001

Table of Contents