FujiFilm X-S10 Owner's Manual page 327

This product complies with the following EU Directives:
•
RoHS Directive 2011/65/EU
•
RE Directive 2014/53/EU
Hereby, FUJIFILM Corporation declares that the radio
equipment type FF200001 is in compliance with Directive
2014/53/EU.
The full text of the EU declaration of conformity is available at
the following internet address:
https://dl.fujifilm-x.com/global/products/cameras/x-s10/
pdf/x-s10_doc-ngc.pdf
This compliance is indicated by the following conformity
marking placed on the product:
This marking is valid for non-Telecom products and EU harmo-
nized Telecom products (e.g. Bluetooth®).
•
Maximum radio-frequency power (EIRP):
WLAN: 10.53 dBm
Bluetooth: 2.54 dBm
IMPORTANT: Read the following notices before using the cam-
era' s built-in wireless transmitter.
Q This product, which contains encryption function de-
veloped in the United States, is controlled by the United
States Export Administration Regulations and may not
be exported or re-exported to any country to which the
United States embargoes goods.
•
Use only a wireless network or Bluetooth Use only a wireless network or Bluetooth device
not accept liability for damages resulting from unautho-
rized use. Do not use in applications requiring a high de-
gree of reliability, for example in medical devices or other
systems that may directly or indirectly impact human life.
When using the device in computer and other systems that
demand a greater degree of reliability than off ered by wire-
less network or Bluetooth devices, be sure to take all neces-
sary precautions to ensure safety and prevent malfunction.
•
Use only in the country in whi Use only i n the country in which the device was pu
device conforms to regulations governing wireless network
and Bluetooth devices in the country in which it was pur-
chased. Observe all location regulations when using the
device. Fujifi lm does not accept liability for problems aris-
ing from use in other jurisdictions.
•
Do not use the device in locations subject to magneti Do not use the device in location
static electricity, or radio i static ele ctricity, or radio interference. nterference. Do not use the trans-
mitter in the vicinity of microwave ovens or in other loca-
tions subject to magnetic fi elds, static electricity, or radio
interference that may prevent reception of wireless signals.
Mutual interference may occur when the transmitter is
used in the vicinity of other wireless devices operating in
the 2.4 GHz band.
•
The wireless transmitter operates The wireless transmitter operates in the 2.4 GHz band
DSSS, OFDM an DSSS, OFDM and GFSK modulation. d GFSK modulation.
Wireless Network and Bluetooth Devices: Cautions
device. . Fujifi lm does
ch the device was purchased. rchased. This
s subject to magnetic fi elds, c fi elds,
in the 2.4 GHz band using using
•
Security: Wireless network and Bluetooth devices transmit
data via radio and consequently their use requires great-
er attention to security than applies in the case of wired
networks.
-
Do not connect to unknown networks or networks to
which you do not have access rights, even if they are
displayed on your device, as such access may be consid-
ered unauthorized. Connect only to networks to which
you have access rights.
-
Be aware that wireless transmissions may be vulnerable
to interception by third parties.
-
This device cannot be directly connected to telecom-
munications networks (including public wireless LANs)
operated by providers or mobile, landline, Internet, or
other telecommunications services.
•
The following may The following may be punishable by law be punishable by law: :
-
Disassembly or modifi cation or this device
-
Removal of device certifi cation labels
•
This device operates on the same fre This device oper ates on the same frequency as commercial
cational, and m cational, and medical devices and w edical devices and wireless transmitters
operates on the same frequency as licensed transmitters
and special unlicensed low-voltage transmitters used in
RFID tracking systems for assembly lines and in other sim-
ilar applications.
•
To prevent interferenc To prevent interference with the above dev e with the above devices, observe the fo
lowing precautions. lowing precautions. Confi rm that the RFID transmitter is not
in operation before using this device. Should you observe
that the device causes interference in licensed transmitters
used for RFID tracking, immediately stop using the aff ected
frequency or move the device to another location. If you
notice that this device causes interference in low-voltage
RFID tracing systems, contact a Fujifi lm representative.
•
Do not use Do not use this device on board this device on board an aircraft.
may remain on even when the camera is off . Bluetooth
can be disabled by selecting OFF for D CONNECTION
SETTING > Bluetooth SETTINGS > Bluetooth ON/
OFF.
For Your Safety
quency as commercial, edu- , edu-
ireless transmitters. . It also
ices, observe the fol- l-
an aircraft. Note that Bluetooth
303
12