Interval Timer Shooting Exposure Smoothing - FujiFilm X-S10 Owner's Manual

O
Interval timer photography cannot be used at a shutter speed of
B (bulb) or with multiple exposure photography. In burst mode, only
one picture will be taken each time the shutter is released.
•
N
Use of a tripod is recommended.
•
Check the battery level before starting. We recommend using USB
power source (P 238).
•
The display turns off between shots and lights a few seconds before
the next shot is taken.
•
The display can be activated at any time by pressing the shutter button.
•
To continue shooting until the number of shots taken equals the
number of exposures remaining at the time interval-timer photogra-
phy started, set the number of shots to ∞.

INTERVAL TIMER SHOOTING EXPOSURE SMOOTHING

Select ON to automatically adjust exposure during interval-timer
photography to prevent it changing dramatically between shots.
ON
•
N
Large changes in subject brightness may make exposure appear er-
ratic. We recommend that you choose shorter values for INTERVAL
TIMER SHOOTING > INTERVAL with subjects that brighten or dim
dramatically during shooting.
•
In manual mode (mode M), exposure smoothing is only available if an
AUTO option is selected for sensitivity.
SHOOTING SETTING (Still Photography)
Options Options
OFF
141
6