1-10
Dell PowerEdge 6x50 Systems Rack Installation Guide
push button
front of rack
&
'()*+
5.
Align the slide-assembly mounting-bracket flange (on the front of the slide
assembly) with the square holes in the front vertical rails (see Figure 1-8).
6.
Push the slide assembly forward until the mounting hooks are located in their
respective square holes on the vertical rail, and then push down on the mounting-
bracket flange until the mounting hooks engage the square holes in the front
vertical rail, allowing the push button to pop out and click.
slide-assembly
mounting-bracket flange
mounting
hooks
slide assemblies (2)