Dell PowerEdge 4300 User Manual page 91

System - Dell System PowerEdge 4300
RS-232 COM Port 1
RS-232 COM Port 2
Parallel Port
Floppy Controller
Mouse Controller
PCI1 - Intel Fast Ethernet LAN Controller
PCI Function 1
PCI3 - Adaptec Ultra/Ultra Wide SCSI Ctrlr
PCI Function 1
PCI/ISA5 - PowerEdge RAID II Adapter
PCI Function 1
Embedded - PCI Host Bridge
PCI Function 1
Embedded - PCI PCI Bridge - Bus 1
PCI Function 1
Bus 1,0 - PCI VGA Controller
PCI Function 1
Standard VGA Resources
Embedded - DEC PCI-PCI Bridge (21152) - Bus 7
PCI Function 1
Bus 2,4 - Adaptec AIC-7890 SCSI Ctrlr
PCI Function 1
Bus 2,6 - Adaptec AIC-7860 SCSI Ctrlr
PCI Function 1
The RCU lets you set a variety of system options through the .sci file. Through this
file, you can notify the system of changes to your hardware and memory configura-
tion, manage input/output (I/O) ports, and set other system operating parameters.
Some options reflect installed hardware detected by the system. These items are dis-
played for your information only; you cannot change them through the utility.
NOTE: Whenever you add an expansion card to the computer, its presence is
reflected by changes to the screen shown in Figure 5-1.
IRQ 4 PORT 3F8h-3FFh
IRQ 3 PORT 2F8h-2FFh
DMA 1 IRQ 7 PORT 378h-37Fh
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Using the Resource Configuration Utility 5-9