Dell PowerEdge 4300 User Manual page 58

3-20 Dell PowerEdge 4300 Systems User's Guide
If you purchased IntranetWare from Dell, the required Novell patches (including the lat-
est revision of the IntranetWare Support Pack recommended by Dell) are provided on
the Dell IntranetWare Support CD.
To install the patches supplied on the Dell IntranetWare Support CD, follow these
steps:
1. Start IntranetWare.
2. Insert the Dell IntranetWare Support CD into the server's CD-ROM drive.
3. At the console prompt, type load cdrom and press <Enter>.
4. Type cd mount nwscd and press <Enter>.
5. Type nwscd:\dpatch and press <Enter>.
A menu lists several patches (including the IntranetWare Support Pack 5), a
backup option for the files being replaced by the IntranetWare Support Pack 5,
and a reboot option.
Dell recommends that you accept the defaults as displayed.
6. Read the list of options and press <F10> to accept them.
The program copies files to your hard-disk drive.
7 . At the message IntranetWare Support Package installation is
complete!, press <Enter>.
8. At the console prompt, type down and press <Enter> to return to "downed
server" mode.
9. At the console prompt, type exit to return to the MS-DOS prompt.
10. Remove the Dell IntranetWare Support CD.
11. Reboot the server.
If you purchased IntranetWare 4.11 from a source other than Dell, you must apply the
IntranetWare Support Pack version 4 or later before IntranetWare SMP can be
installed.
The current IntranetWare Support Pack is version 5 and is an MS-DOS–executable patch
file (iwsp5b.exe) available for download from Novell's World Wide Web site at
www.novell.com. For complete instructions on applying IntranetWare Support Pack 5,
refer to the Novell documentation.