Dell PowerEdge 4300 User Manual page 5

wrists relaxed and flat
arms at desk level
When you disconnect a cable from your system, pull on its connector or on its strain-
relief loop, not on the cable itself. Some cables have a connector with locking tabs; if
you are disconnecting this type of cable, press in on the locking tabs before discon-
necting the cable. As you pull connectors apart, keep them evenly aligned to avoid
bending any connector pins. Also, before you connect a cable, make sure both con-
nectors are correctly oriented and aligned.
Static electricity can harm delicate components inside your computer. To prevent
static damage, discharge static electricity from your body before you touch any of
your computer's electronic components, such as the microprocessor. You can do so
by touching an unpainted metal surface on the computer chassis.
As you continue to work inside the computer, periodically touch an unpainted metal
surface to remove any static charge your body may have accumulated.
monitor screen at or below eye level
monitor and
keyboard
positioned
directly
in front of user
feet flat on
the floor
vii