Dell PowerEdge 4300 User Manual page 37

You can view the asset tag number using the System Setup program as
described in Chapter 4, "Using the System Setup Program."
An asset tag number can have up to ten characters; any combination of characters,
excluding spaces, is valid. To assign or change an asset tag number, type asset and a
space followed by the new number; then press <Enter>. For example, type the fol-
lowing command line and press <Enter>:
asset 1234567890
When prompted to verify the asset tag number, type y and press <Enter>. The sys-
tem then displays the new or modified asset tag number and the service tag number.
To delete the asset tag number without assigning a new one, type asset /d and
press <Enter>.
Table 2-2 lists the command-line options you can use with the Asset Tag utility. To use
one of these options, type asset and a space followed by the option.
.
/d Deletes the asset tag number
/? Displays the Asset Tag utility help
screen
Using the Dell Server Assistant CD 2-11