Dell PowerEdge 2850 Information Update page 14

There are memory-related error messages on the system LCD, or in the SEL.
1 Enter the System Setup program and disable the Redundant Memory option, if applicable.
See "Using the System Setup Program" in your User's Guide.
2 Run the appropriate online diagnostic test. See "Using Server Administrator Diagnostics"
in "Running System Diagnostics" in the Installation and Troubleshooting Guide.
3 Replace the memory module(s) identified by the diagnostics. See "Installing Memory
Modules" in "Installing System Components" in the Installation and Troubleshooting Guide.
4 Enter the System Setup program and enable the Redundant Memory option, if disabled
in step 1.
5 Restart the system. If there are still memory-related errors on the system LCD, or in the
system event log (SEL), see "Getting Help" in the Installation and Troubleshooting Guide.
12
Information Update