Dell 2100 User Manual page 99

6. Install the new battery with the side labeled "+" fac-
ing up.
Place the new battery in the socket, and press down
on it until the battery snaps into the socket.
7. If you removed any PCI expansion cards, replace
them according to the instructions in "Installing
an Expansion Card," earlier in this chapter.
8. Replace the computer cover according to the
instructions in "Replacing the Computer Cover"
in Chapter 6, reconnect your computer and
peripherals to their power sources, and turn them
on.
9. Enter the System Setup program, and confirm
that the battery is operating properly. See Chap-
ter 4, "Using the System Setup Program."
Enter the correct time and date through the System
Setup program's Time and Date categories. Also
reenter any system configuration information that is
no longer displayed on the System Setup screens,
and then exit the System Setup program.
Installing System Board Options 7-99