Dell 2100 User Manual page 109

Figure 8-11. Connecting an Optional SCSI Controller Card
5. Connect the other end of the interface cable to the
SCSI drives in the external bays.
If you have more than one SCSI device in the exter-
nal bays, you should connect the end connector on
the interface cable to the CD-ROM drive and enable
termination for the CD-ROM drive. See "SCSI Con-
figuration Guidelines," in Chapter 9 for instructions
on enabling termination.
6. Replace the computer cover according to the
instructions in "Replacing the Computer Cover"
in Chapter 6.
SCSI controller card
7. Reconnect your computer and peripherals to
their power sources, and turn them on.
8. Verify correct operation of your system.
Refer to the chapter titled "Running the Diskette-
Based Diagnostics" in your Diagnostics and
Troubleshooting Guide, and run the appropriate
tests in the SCSI Devices Test Group to verify that
the new SCSI controller is functioning correctly.
Installing Drives in the External Bays
SCSI drives
in the external
bays (2)
SCSI cable
8-109