Table of Contents
Advertisement
2. Installation
To install the interface, first switch off the ignition and disconnect the vehicle's battery.
Please read the owner`s manual of the car, regarding the battery`s disconnection! If
required, enable the car`s Sleep-mode (hibernation mode)
In case the sleep-mode does not succeed, the disconnection of the battery can be done
with a resistor lead.
If the necessary stabilized power supply for the interface is not taken directly from the
battery, the chosen connection has to be checked for being constantly stabile.
The interface needs a permanent 12V source!
2.1.
Place of installation
The interface is supposed to be installed at a suitable location behind the factory head-unit.
The factory head unit in the Insignia-B with 8inch monitor is located in the passenger
footwell on the right side under the glove compartment.
Version 15.09.2020
HW:CAM(V100)/(V20+V41)
RL4-MM-NP
Advertisement
Table of Contents
Need help?
Do you have a question about the RL4-MM-NP and is the answer not in the manual?
Questions and answers