Table of Contents
Advertisement
6.11 Raising/Lowering Elevating Front Riggings
1.
Perform one of the following:
•
Raising - Pull back on the release lever A and raise front
rigging to the desired height.
•
Lowering - Support front rigging with one hand away from
the release lever. Push release lever downward with other
hand.
1143155-R-01
6.12 Adjusting Calfpads
Rotate the calfpad A towards outside of the wheelchair.
1.
2.
Slide the calfpad up or down until the desired position is obtained.
If one of the top two calf pad adjustment positions is
being used, the legrest will need to be raised to avoid
interference with the front stabilizers while going over
obstacles or going up and down ramps.
3.
Rotate the calfpad towards the inside of the wheelchair.
Usage
47
Advertisement
Table of Contents
