Installing Tape Device Drivers For Windows 2000 Backup And Recovery Tools; Installing Drivers For Powervault Tape Drives - Dell PowerVault 750N System Administrator Manual

Click Restore.
3
Click the Redirection tab.
4
Click the check box next to Redirect Files.
5
Enter the drive letter and path where you want the files to be restored in the text boxes
6
next to Restore to drive and Restore to path.
Click Run Now to run the restore immediately or click Schedule to schedule your
7
restore job to run at a later time.
Installing Tape Device Drivers for Windows
2000 Backup and Recovery Tools
If you are using Windows 2000 backup and recovery tools, you might need to install drivers
for both tape drives and tape media changers.
NOTE: Most of the tape device drivers are located in the c:\dell\drivers directory. However, you
should always check the http://support.dell.com website for updated drivers and patches.

Installing Drivers for PowerVault Tape Drives

To install drivers for the PowerVault tape drives, perform the following steps.
Connect the Dell PowerVault tape device and restart the system.
1
Connect to the PowerVault NAS Manager.
2
Click Maintenance and then click Terminal Services.
3
Log in to a Terminal Services Client session.
4
On the Advanced Administration Menu under System Management, click Computer
5
Management.
Click Computer Management in the left pane.
6
Click System Tools in the left pane.
7
Click Device Manager in the left pane.
8
Click Unknown Devices in the right pane.
9
Double-click Unknown Tape Device.
10
Click Driver in the pop-up window.
11
5-12 S y st e m Re c ov e r y, B a ck u p , a n d Re s to r e