Delete A Partition Or Volume; Working With Dynamic Volumes; Creating A Dynamic Volume - Dell PowerVault 750N System Administrator Manual

Select file system type and formatting options:
5
•
•
Click OK to begin formatting.
6
A progress bar displays in the list view.

Delete a Partition or Volume

NOTICE: You must delete all shares and persistent images from your volume before deleting it.
If a volume is removed before all shares of that volume have been removed, the NAS Manager
might not display shares correctly.
Right-click the designated volume and click Delete Volume.
1
Click Yes to delete or No to cancel.
2
The volume is removed immediately if you click Yes.

Working With Dynamic Volumes

Dynamic volumes are volumes created on dynamic disks with Array Manager. This section
discusses how to create and extend dynamic volumes.

Creating a Dynamic Volume

NOTE: To take advantage of all the system features such as defrag and encryption , it is
recommended that you use the default value of 64 KB for the allocation unit size when creating
a virtual disk.
NOTE: The maximum supported volume size is 2 TB.
From the toolbar, click the Create Volume icon.
1
The Create Volume Wizard appears.
Click Next.
2
You are asked to select whether to create a partition or a volume. Make sure that the
Dynamic volume button is highlighted.
The dynamic group to which the volume will belong is automatically created and
appears selected.
3-18 Adv a n c ed Di sk a n d Vo l u m e M a n a g e m en t U si n g A r r a y M a n a g e r
Quick format – This option formats the volume or partition without scanning for
bad sectors in the volume or partition. Check this box to use this format method.
Enable file and folder compression – This option can be used only if you selected
NTFS format. Check this box to use this format method.