Time Alarm; Set Alarm; Activate/Deactivate Alarm; Temperature Trend Arrow - La Crosse Technology W86111V2 Instruction Manual

Set Alarm:

1. Hold the ALARM button to enter Alarm Settings. The letters "AL" will show in the weekday area.
2. Use the + or - button to adjust values.
3. Press the ALARM button to confirm and move to next item.
Silence a sounding alarm:
Press any button except SNOOZE to silence alarm for 24 hours.

Activate/Deactivate Alarm:

• Press the ALARM button to view alarm time.
• Press the ALARM button again to activate or deactivate the alarm.
• The Bell Icon will show when alarm is active.
Snooze:
• When the alarm sounds, press the SNOOZE button to silence the alarm for 10 minutes. Zz will show
next to the Bell Icon.
Note: The alarm will sound with increasing frequency for two minutes, then shut off completely if not
deactivated.
• The UP and DOWN arrows indicate changes in temperature (2 °F) over the past 3 hours. The RIGHT arrow
indicates no change.
• The arrows will update every 30 minutes and compare data from exactly one hour prior.
Temperature rose over
the past 3 hours
ATO M IC D IG ITAL C LO CK
T IM E ALA RM
T E MP E R AT U R E T R END A RROWS
Temperature is unchanged
over the past 3 hours
Temperature fell over
the past 3 hours
5 | PAGE