Power Up; Atomic Time - La Crosse Technology W86111V2 Instruction Manual

1. Insert 2-AA batteries into your Outdoor Sensor.
2. Insert 2-AA batteries into your Digital Clock.
3. Once the Outdoor Sensor is reading to your clock, place it outside in a shaded location to protect it from
the sun's heat.
Watch sensor mounting video:
Outdoor Sensor
TX141v3
• Your Clock will automatically search for the Atomic Time Signal at UTC 7:00, 8:00, 9:00, 10:00, and 11:00.
• Press the MINUS (-) button to manually start or stop search for the WWVB Atomic Time Signal.
• While searching, the Tower Icon
received by your clock.
• Please be sure you have selected your time zone from the list in the Settings menu. When the Atomic time
signal is received, the clock will set to the time zone selected. Default is Eastern time.
• For information about WWVB Atomic Time visit:
FAHR ENHE IT / CE LCIU S T E MPERATU R E DI S P L AY
• Press the SET button to display Temperature in Fahrenheit or Celsius.
ATO M IC D IG ITAL C LO CK
P OW ER U P
bit.ly/TH_SensorMounting
Atomic Clock
W86111v3
AA
AA
ATO MIC TI ME
will flash. The Tower Icon will be solid when the WWVB Signal is
bit.ly/AtomicTime
3 | PAGE