Removing The Blender; Useful Tips - Silvercrest SSTME 600 A1 Operating Instructions Manual

Removing the blender

Once you have finished processing the food in the attachment:
1) Always start by setting switch 5 to the off position ("0") and pulling out the
mains plug.
2) Wait until the motor has come to a complete standstill before lifting the
blender 3 off the motor block 6. Rotate the blender 3 anticlockwise until
the arrow
Remove the blender 3 from the motor block 6 in a vertical, upward motion.

Useful tips

■ To achieve the best results when puréeing firm ingredients, add small amounts
one after the other into the blender 3 rather than a single large portion.
■ When processing firm ingredients, cut them into small pieces (2 – 3 cm).
■ When mixing liquid ingredients, start off with a small amount of liquid.
Gradually add more liquids to the mixture through the measuring cap.
■ The appliance can be stabilised by placing your hand on top of the closed
blender during operation.
■ For stirring solid or very thick liquid foods, it can be useful to use level P
to prevent the cutting blades 4 from blocking.
NOTE
► Do not use the appliance to grind crystals of cooking salt, refined sugar or
white sugar. For example, to make powdered sugar.
SSTME 600 A1
under the blender handle is located above the position.
GB │ IE │
27 ■