TP-Link RE200 User Manual page 32

Chapter 5
• To enable or disable the extended network:
1. Go to Wireless > Extended
2. Extended networks are enabled by default. If you want to disable the wireless function
of a certain band, just clear the
of this band will be invalid.
3. Click SAVE.
• To change the wireless network name (SSID):
1. Go to Wireless > Extended
2. Create a new SSID in
case-sensitive.
3. Click SAVE.
Note:
If you have changed the wireless settings via a wireless device, you will be disconnected after the settings are applied.
Please write down the new SSID for future use.
• To hide the SSID of the extended network:
1. Go to Wireless > Extended
2. Select Hide SSID broadcast, and the corresponding SSID will not be displayed when
wireless devices scan for local wireless networks. You need to manually enter the
SSID to join the network.
3. Click SAVE.
Network.
Enable checkbox. In this case, all the wireless settings
Network.
Extended 2.4GHz SSID
Network.
Customize Your Network
or click COPY HOST SSID. The value is
29