TP-Link RE200 User Manual page 12

Chapter 2
2 ) Select your host router's 2.4GHz SSID (network name), enter its password (NOT
the password you just created for management), and click NEXT.
3 ) Select your host router's 5GHz SSID (network name), enter its password (NOT the
password you just created for management), and click NEXT.
Note:
1. If your host router does not support 5GHz wireless network, please click
2. It is recommended to enable
dual-band networks. With Smart Connect enabled, your host router's 2.4GHz and 5GHz share the same SSID
(network name) and password. Refer to your host router's user guide to enable Smart Connect.
Smart Connect on your host router to enjoy a seamless connection between
Set Up Internet Connection
SKIP to continue.
9