Rinse Holes Under The Agitator; If You Have Hard Water - Asko PROFESSIONAL WMC947PS Operating Instructions Manual

Table of Contents

Advertisement

CARE AND CLEANING

RINSE HOLES UNDER THE AGITATOR

If you suspect that objects such as nails or paper clips
may have fallen into the wash drum, you should check
the space under the agitator. Such objects can rust and
leave marks on clothing. Nails and other sharp objects
can cause holes in fabrics.
Do as follows:
1. Insert a screwdriver or the like into the hole on the
agitator as illustrated and carefully pry to the left.
2. Use your other hand to grasp the agitator and pull it
towards you.
3. Lift the agitator.
4. Remove any objects.
5. Place the agitator in the mounting hole with the
F-mark towards you. Ensure that all the agitator
fasteners are in their holes in the drum. Push it in
until it catches.
12

IF YOU HAVE HARD WATER

If you live in an area with hard water (high limescale
content), a greyish-white coating may form on the
washer drum. To remove this, empty a sachet of citric
acid, approx. 20 gram, into the washer drum and run any
90 °C programme. Repeat if necessary.

Advertisement

Table of Contents
loading

Table of Contents