Roomspecificsettings In The Clone File - Philips HFL3014/12 Series Professional Installation Manual

<Broadcast medium="dvbc" frequency="801937" system="west" serviceID="927" ONID="1" TSID="3" modulation="auto"
symbolrate="6877000" bandwidth="Auto" servicetype="Radio"
<Setup presetnumber="12" name="Rock Alternative" blank="0" skip="0" FreePKG="1" PayPKG1="0" PayPKG2="0" TTV1="0"
TTV2="0" TTV3="0" TTV4="0" TTV5="0" TTV6="0" TTV7="0" TTV8="0" TTV9="0" TTV10="0"
</Channel>
<Channel>
<Broadcast medium="dvbt" frequency="490000" system="west" serviceID="1537" ONID="8442" TSID="6" modulation="auto"
symbolrate="0" bandwidth="8MHz"
<Setup presetnumber="13" name="TF1" blank="0" skip="0" FreePKG="1" PayPKG1="0" PayPKG2="0" TTV1="0" TTV2="0" TTV3="0"
TTV4="0" TTV5="0" TTV6="0" TTV7="0" TTV8="0" TTV9="0"
</Channel>

8.2 RoomSpecificSettings in the clone file

RoomSpecificSettings are used to automatically set the RoomID and Multi RC setting based on TV
serialnumber. This file needs to be created, but after that the same clone can be used on the same
location.
The folder name used in the root of the USB device containing the clone data:
TPS191HE_CloneData/MasterCloneData/
Go to the room specific via .../MasterCloneData/RoomSpecificSettings/RoomSpecificSettings.xml
In below example, you see 3 TV's in the list, all with different settings linked to the serial number.
Note that you see 2 times the same room number but with a different MultiRemoteControl code.
<?xml version='1.0' encoding='UTF-8'
<RoomSpecificSettings>
<SchemaVersion MajorVerNo="1" MinorVerNo="0"
<TV>
<SerialNumber>FZ1A1925000001</SerialNumber>
<item>
<Name>Identification Settings.RoomID</Name>
<Value>00100</Value>
</item>
<item>
<Name>Input Control.Multi Remote
<Value>off</Value>
</item>
</TV>
<TV>
<SerialNumber>FZ1A1925000002</SerialNumber>
<item>
<Name>Identification Settings.RoomID</Name>
<Value>00101</Value>
</item>
<item>
<Name>Input Control.Multi Remote
<Value>0</Value>
</item>
</TV>
<TV>
<SerialNumber>FZ1A1925000003</SerialNumber>
<item>
<Name>Identification Settings.RoomID</Name>
<Value>00101</Value>
</item>
<item>
<Name>Settings.Input Control.Multi Remote
<Value>1</Value>
</item>
</TV>
</RoomSpecificSettings>
/>
servicetype="TV"></Broadcast>
TTV10="0"></Setup>
?>
/>
Control</Name>
Control</Name>
Control</Name>
- 61 -
/>