Table of Contents
Advertisement
o Navigate to the [AutoSCART] menu
o You will see below items:
o [Off]: From the moment a device via
SCART is connected to the TV, the TV
won't switch automatically to source
[SCART]
o [On]: From the moment a device via
SCART is connected to the TV, the TV
will switch automatically to source
[SCART]
o [Power on SCART]: From the moment
a device via SCART is connected to the
TV, and the device is switched on the
TV
will
automatically to source [SCART]
o Navigate to the [Easylink] menu
o You will see below items:
o [Easylink]: Disable all HDMI CEC
functionality via [Off] or enable via
[On]
o [EasyLink Break-in]: TV shall disable
auto
connected HDMI CEC enabled source
via [Off] or enable via [On] when
device is plugged or switched on
o [EasyLink Remote Control]: The keys
from your TV RC will not be
forwarded via CEC when [Off] or will
be forwarded when [On]
o [Easylink Application]: When [On],
then TV shall forward the "Menu"
key to the source if the device is
HDMI CEC enabled and supports RC
pass thru
- 35 -
switch
on
and
switch
tuning/switching
to
Note: Above menus are only
available when [EasyLink] is
set to [On]
the
Hide quick links:
Advertisement
Table of Contents
