Philips HFL3014/12 Series Professional Installation Manual page 44

connected
[Easylink Autostart] or you can disable
the speakers using [Off]
Note: The audio system (supporting
ARC) must be connected via HDMI
o [Headphone]: No audio will be played
via the
speakers when [Off], it will be heard
when [On] and a device is connected
o [Headphone Spk Fixed Vol]: When
[On], the volume level of the
Headphone/Bathroom speaker will be
fixed to the Switch on Setting
o [Headphone Detection]: When the
Headphone Detection is set to [On]
and the headphone is connected then
TV speakers
automatically. When [Off], the guest
has to manually mute the TV speakers
o Navigate to the [Sound] [TV Placement]
menu
o You will see [On the Wall] and [On a
stand]. Depending on your selection you
will optimize the sound acoustics of the
TV for the placement of your TV
o Navigate to the [Sound] [Advanced]
menu
o You will see below items:
o [Surround Mode]: Select the sound
effect for the internal TV, you can
choose
Surround]
o [Auto volume levelling]: Select [ON] or
[OFF] to let assist user in controlling
the sound listening level. Select [ON]
to deliver a more consistent output.
o [Clear Sound]: Select if you want to
enable Clear Sound to improve the
sound for speech [On] or [Off] if you
want to disable
o [Audio Out Format]: Set the audio out
signal of the TV to fit with the sound
capabilities of the connected Home
Theatre
(uncompressed)], [Multichannel],
o [Audio Out Levelling]: Select the level
out of the volume of the Home Theatre
System and the TV when switching
over from one to the other to [More],
[Medium] or [Less]
- 43 -
audio system
Headphone/Bathroom
shall be muted
[Stereo] or [Incredible
System to [Stereo
using