Sources - Philips HFL3014/12 Series Professional Installation Manual

6.10 Sources

o Navigate to the [Channel Settings] menu
o You will see below items:
o [EPG]:
 [Enable]: You can enable EPG via
[Yes] or disable via [No]
 The EPG data comes from the
broadcaster
o [Enable Subtitles]: You can enable the
subtitles via [Yes] or disable via [No]
o [Enable Teletext]: You can enable
teletext via [Yes] or disable via [No]
o [Enable MHEG]: You can enable MHEG
via [Yes] or disable via [No]
o [Enable CI/CI+]: TV shall disable the
CI/CI+ conditional access support, all UI
elements relating to the CI/CI+ shall be
removed if [No] is selected, if [Yes] is
selected, then all CI/CI+ functionality
shall be available
o [Display Scrambled Channel Banner]:
If a channel is scrambled, you will get
an OSD with this information if [Yes] or
OSD will not be shown if [No]
o Navigate to the [Sources] menu
o
o Navigate to the [Enable Sources] menu
o You will see a list of externals (including
USB media browser). You can enable or
disable sources to be available in the
menu
o
o Navigate to the [USB break-in] menu
o You can enable USB break-in using [On] or
disable using [Off]
Note: [USB break-in] is only
accessible if [Enable Sources][USB
Media Brower] is checked, else the
USB will only deliver 5V
o Navigate to the [USB Auto Play] menu
o You will see below items:
o [Off]: From the moment an USB device
is connected to the TV, no files will be
played automatically
o [On]: From the moment an USB device
is connected to the TV, all playable files
in the root from your USB device will
automatically be played in a loop
- 34 -