Apply The Standard Preset Mode - NETGEAR S8000 User Manual

Nighthawk S8000 Gaming & Streaming Advanced 8-Port Gigabit Ethernet Switch (GS808E)
The login page displays.
3. Enter the switch password.
The default password is password. The password is case-sensitive.
The HOME page displays.
4. Select PRESET MODES.
The PRESET MODES page displays. The LOAD tab is automatically selected.
5. Select MEDIA STREAMING PRESET.
The PREVIEW MEDIA STREAMING PRESET section shows the settings for the Media
Streaming Preset mode.
6. Click the APPLY button.
Your settings are saved.

Apply the Standard Preset Mode

The Standard Preset mode, which is the default mode, gives all ports equal prioritization.
Applying the Standard Preset mode does the following:
• Sets the QoS port priority for all ports to High.
• Enables IGMP snooping for the switch (for more information, see Manage IGMP
Snooping on page 75).
• Disables flow control for all ports (for more information, Manage Flow Control for a
Port on page 41).
• Disables power saving for the switch (for more information, see Manage the Power
Saving Mode on page 91).
• Sets the QoS mode to port-based (for more information, see Use Port-Based Quality
of Service and Set Port Priorities on page 35).
Before you apply the Standard Preset mode, you can save your current QoS, port
prioritization, multicast, flow control, and IGMP snooping settings and other settings as
a custom preset mode (see Save Your Quality of Service Settings as a Custom Preset
Mode on page 32) so that you can easily revert to your current QoS configuration.
To apply the Standard Preset mode:
1. Open a web browser from a computer that is connected to the same network as the
switch or to the switch directly through an Ethernet cable.
2. Enter the IP address that is assigned to the switch.
The login page displays.
Optimize the Switch
Performance
31 User Manual